Technical Data
Specification and Performance ReferenceWoven Vinyl Flooring Technical Data
Compare woven vinyl flooring formats, Signature performance parameters, backing options, installation requirements, and care guidance for your project. Confirm the selected collection, thickness, and backing before specification.
Project Review
Performance considerations for your space
Slip Performance
Compare the wet pendulum, dynamic friction, and shod ramp results below. Each test describes different conditions; select the flooring for the actual use area.
Rolling Chairs
The Signature castor-chair test recorded no visible damage after 25,000 revolutions. Match the flooring construction, chair castors, and maintenance plan to the project.
Fire Performance
Review the ASTM E648 critical radiant flux result and the tested assembly below. Confirm project requirements for the selected construction.
Routine Care
Vacuum regularly, remove spills promptly, and use controlled wet cleaning with effective water recovery. Choose the cleaning frequency for traffic and soil levels.
Backing Selection
Backing affects thickness, installation, underfoot feel, and performance. Confirm available options for the selected color and format.
PVC-Free Option
Eco Resonance is a separate PVC-free woven textile tile collection. Use its own specifications when comparing materials.
General Woven Vinyl Specification
Woven vinyl formats and construction options
Bespoke Formats
Custom shapes and special format options
Triangle 700
700 mm × 606 mm / approx. 27.56 in × 23.86 in
Triangle 600
600 mm × 520 mm / approx. 23.62 in × 20.47 in
Triangle 500
500 mm × 433 mm / approx. 19.69 in × 17.05 in
Prism
461 mm × 600 mm / approx. 18.15 in × 23.62 in
Rhombus
289 mm × 500 mm / approx. 11.38 in × 19.69 in
Hexagon
519 mm × 600 mm / approx. 20.43 in × 23.62 in
Scale
600 mm × 622 mm / approx. 23.62 in × 24.49 in
Wing 700
700 mm × 303 mm / approx. 27.56 in × 11.93 in
Wing 1000
1000 mm × 433 mm / approx. 39.37 in × 17.05 in
Wave
400 mm × 600 mm / approx. 15.75 in × 23.62 in
Signature Performance
Signature flooring performance parameters
These parameters are the test references for Signature colorways. Results describe the tested specimens and conditions shown below. Confirm that your selected backing, thickness, and installation match before specification; the values do not automatically apply to Core, Eco Resonance, or custom constructions.
Wet test with slider 96 (4S rubber), perpendicular to the surface texture.
Test speed: 0.20 m/s.
Test direction perpendicular to the surface texture.
Tested assembly: 2.3 mm flooring, mechanically fixed to 6.3 mm fiber-cement board.
For additional project requirements, including acoustic, thermal, electrical, emissions, dimensional stability, or regional fire criteria, request technical support for the exact product construction.
Juvern Care
Cleaning and stain removal guidance
Routine Cleaning
Vacuum regularly to remove grit and loose dirt. For standard PVC-backed woven vinyl tiles and rolls, use clean cold or lukewarm water and a soft brush as needed.
Cleaner Selection
If water alone is insufficient, use a compatible pH-neutral cleaner at the recommended dilution after a small-area test. Recover cleaning water and allow the floor to dry.
Periodic Deep Cleaning
Schedule deeper cleaning when routine care no longer removes the soil, according to traffic and site conditions. Use compatible equipment and follow the current maintenance guide. Avoid flooding and standing water at seams.
Spills and Special Constructions
Treat spills promptly and test any cleaning product in an inconspicuous area. Avoid abrasive tools, steam, and strong solvents unless specifically approved. Eco Resonance, rugs, and special backings require their own care instructions.
Need More Detail?
Contact us for project-specific technical support
If you need more detail on performance, backing materials, bespoke formats, installation conditions, or maintenance guidance, we can support you directly.